ZNV系列螺旋挤浆机/ ZNV Series Screw Press
用 途:
ZNV系列螺旋挤浆机是一种常用的机械挤压过滤的高浓段的洗涤浓缩设备，广泛适用于制浆造纸行业的废纸制浆，热分散系统和高浓段的洗涤浓缩，也适用于硫酸盐木浆，亚铵法草浆的洗涤浓缩。
结构特点:
螺旋挤浆机由压榨螺旋,筛鼓分成上、下两半，然后用螺栓连接而成。机体部分有进浆斗、槽体及尾架，然后采用螺栓及定位销连 接而成，便予装拆。浆料出口装有反压装置，通过调整气控压力调节出浆口通道的大小,达到所要求的浆料干度。传动装置采用电 动机、减速器和变频器，以改变螺旋转速来调节产量。
设备在滤鼓上装有防滑结构，使浆料浓缩更稳定，设备运行更可靠。
Application:
ZNV series screw press is a washing and thickening equipment widely used to press the stock mechanically in the high consistency section, which is suitable for waste paper pulping and dispersion system as well as washing and thickening of pulp with high consistency, and also suitable for washing and thickening sulfate wood pulp and ammonium sulfite straw pulp.
Design Features:
The screw press consis t s of press screw, upper and low screening baskets. Baskets are connected through bolts. The press body consists of inlet hopper, vat and end bracket.These parts are connected through bolts and position pins.It is easier to disas- semble.The outlet of screw press has been installed with counterpress device.The outlet consistency can be reached by adapting the outlet size through air con- trol press.The driving device consists of motor, gear- box and frequency transformer in order to adapt the capacity of screw press through changing the working speed of screw.Withits anti-slip mechanism mounted on the screening baskets, the screw press can work more reliably.
主要技术参数 / Main Technical Data
|
型号Model |
开放式Open-type |
ZNV1 |
ZNV2 |
ZNV3 |
ZNV4 |
ZNV5 |
ZNV6 |
ZNV7 |
|
|
|
|
|
|
箱式Closed-type |
ZNV21 |
ZNV22 |
ZNV23 |
ZNV24 |
ZNV25 |
ZNV26 |
ZNV27 |
ZNV28 |
ZNV1005 |
ZNV1107 |
ZNV1410 |
|
螺旋直径Screw Dia(mm) |
Φ300 |
Φ350 |
Φ400 |
Φ450 |
Φ525 |
Φ600 |
Φ700 |
Φ800 |
Φ1000 |
Φ1100 |
Φ1400 |
|
|
螺旋直径Screw Dia(mm) |
10-12 |
10-12 |
10-12 |
10-12 |
10-12 |
10-12 |
10-12 |
10-12 |
10-12 |
10-12 |
10-12 |
|
|
出浆浓度Outlet Consistency(%) |
28-30 |
28-30 |
28-30 |
28-30 |
28-30 |
28-30 |
28-30 |
28-30 |
28-30 |
28-30 |
28-30 |
|
|
生产能力 |
OCC |
25-30 |
30-40 |
50-60 |
60-80 |
80-100 |
110-150 |
180-200 |
220-250 |
250-300 |
320-350 |
500 |
|
Capacity(t/24h) |
脱墨浆Deinking Pulp |
15-20 |
25-30 |
40-50 |
50-60 |
60-80 |
90-120 |
130-150 |
150-180 |
165-200 |
220-250 |
350 |
|
电机功率(KW) |
OCC |
22 |
30 |
45 |
55 |
75 |
110 |
160 |
200 |
220 |
280 |
450 |
|
Motor Power |
脱墨浆Deinking pulp |
18.5 |
22 |
37 |
45 |
55 |
90 |
132 |
160 |
160 |
200 |
280 |
依浆种不同，产量有变动。如工艺需求低进浆浓度或更高出浆浓度，参数可另行设计。
The capacity will change based on different kinds of pulp. FJLIME can provide customized design service according to the customer's special require- ments to decrease the inlet consistency or to increase the outlet consisteny.
