ZCF系列扩散式脱墨浮选机/ ZCF Series Diffusion Deinking Flotation Machine
结构特点:
该设备由钢制圆柱形的浮选槽、阶梯扩散式浆气混合器、进浆环管、中间排渣管及液位调节箱等组成。一般装置5-7台串联使用，也可装置第二级浮选，以回收墨渣浆中的纤维。
在浆料浓度、压力、流速等主要工艺参数稳定的情况下，其浮选槽内液位、气泡大小也稳定，操作方便、安全可靠。
浮选槽可以单台水平安装，也可以多台叠装，占地面积小。可根据每个浮选槽中浆料油墨粒子含量的不同调整液位，以保证取得最佳的浮选脱墨效果及较小的纤维流失。
Design Features:
ZCF series diffusion deinking flotation ma- chine consists of steel cylindrical flotation cell, step diffusion stock-air mixer, annular stock inlet pipe,center reject pipe and level control box, etc. Normally, ZCF series diffu- sion deinking flotation machine can be used as in cascade of 5-7 cells or secondary stage flotation for recovering fiber from ink reject.
Under the stable conditions of the stock consistency, pressure, flow rate, etc., the suspension levet and the size of air bubbles in the flotation cell are steady. With its safety and reliability, the flotation machine is easy to operate,
The flotation cell can be installed separately in horizontal or one is installed on the top of the other for saving space.
According to the different amounts of ink particles in stock in each flotation cell, the suspension level can be adjusted, which ensures optimal flotation deinking efficiency and minimum fiber loss.
主要技术参数 / Main technical data
|
型号Model |
ZCF11 |
ZCF12 |
ZCF13 |
ZCF14 |
ZCF15 |
ZCF15 |
|
槽体规格（直径×高）cellSize（Φ×h）（Mm） |
φ800×920 |
φ1200×1380 |
φ1600×1840 |
φ2000×2300 |
φ2600×2900 |
φ2600×2900 |
|
浆料通过量Throughput（M^3/h） |
30~40 |
75~95 |
160~200 |
280~360 |
400~460 |
400~460 |
|
油墨脱除率Ink Removal Rate（%） |
90~92 |
90~92 |
90~92 |
90~92 |
90~92 |
90~92 |
|
进浆浓度Inlet Consistency（%） |
0-8~1-2 |
0-8~1-2 |
0-8~1-2 |
0-8~1-2 |
0-8~1-2 |
0-8~1-2 |
|
浆料Ph值Ph Value Of Stock |
9~11 |
9~11 |
9~11 |
9~11 |
9~11 |
9~11 |
|
泵压控制Control Of Pump Pressure(Mpa) |
0.10~0-15 |
0.10~0-15 |
0.10~0-15 |
0.10~0-15 |
0.10~0-15 |
0.10~0-15 |
